Inlet and drain filter need to be cleaned monthly. If you do not follow the rules for caring for PMM, it can stop work and issue a fault code on the display. How to clean the dishwasher filter, every user should know. We have compiled detailed instructions so that you can perform prevention in time and avoid problems and breakdowns.
Filter device and causes of clogging
Once you have purchased and installed the equipment, carefully read the instructions for use - it indicates where the items are. Drain or drain filter is located at the bottom of the hopper, in the pan next to the sprayer. Before the first start of the dishwasher, examine it to know how it is dismantled and cleaned.
How the element is arranged:
- fine metal gauze;
- outer large mesh mesh in the form of glass for the retention of large particles;
- internal mesh, which is located under the external plastic "glass".
Dishwashers Bosch( Bosch), Electrolux and other brands are equipped with a filtration system to protect the basic mechanisms from the ingress of foreign objects. Most often, the system is clogged with food debris, small debris, napkins, grease. As a result, the waste water does not go to the drain, the machine stops working.
If it is untimely to clean the filters, then a foreign object can get into the pump impeller, circulation pump and block the operation of the water pump. And even become the cause of their failure.
The filler system may not allow water to pass through if the mesh at the valve inlet is overrun. We will understand how to clean the items from grease and debris.
Interesting! Some models have a self-cleaning function. Therefore, if you do not have the desire once every two months to engage in the prevention of blockages, pay attention to these characteristics of MMP upon purchase.
How to clean the filters
Depending on the brand of the dishwasher, the drain filter may vary in shape, size, method of attachment. In some models it is enough to twist the part and pull it out of the bunker, in others it will be necessary to unscrew the fixing screws. We will describe the general sequence of actions:
- open the door of the tank;
- remove the lower basket for dishes;
- unscrew the external filter and remove the fine mesh.
After you get the item, proceed with the cleaning. There are several options:
- Mix dish gel and scouring powder. Apply the mixture with an old non-brush. After cleaning, rinse the parts thoroughly with running water.
- Soda will also help get rid of fat. Mix it with fine salt. Apply the product with a sponge for dishes, then rinse under pressure from the tap.
- Remove citric acid will help citric acid or vinegar. Soak the parts for a while in their solution, then rinse with water.
Also check the pump impeller, which is located behind the filter. Do this:
- Siphon water from the tank where the pump is located. Use a sponge for this.
- Pull the flap to the side and then toward you. Put the cover aside.
- Check the impeller for blockage, clean.
Clean the inside of the hopper. This can be done by hand, with a brush and detergent. Or run the dishwasher idle, using a special tool.
How to clean the dishwasher , read our article.
To tidy up the inlet filter mesh, turn off the water. Disconnect the intake hose from the PMM, remove the net. How to remove scale, we have described above.
If the filter is damaged, it will not be difficult to replace it. The cost of plastic parts varies from 3,000 to 4,000 rubles.
Now you understand how important the timely cleaning of a compact, built-in and freestanding dishwasher. After the end of the cycle, check the filter to avoid clogging. Then the technique will work without failure.
Related videos will help you:
