Error F11 in the washing machine Indesit

What does the F11 error mean, which is lit on the scoreboard of the Indesit washing machine? What should I do if the “Additional rinsing” - “Spin” - “Revolutions” lights blink, the indicators “Delay” - “Fast washout” - “Additional rinse” are lit?

To solve the problem, you need to decipher the fault code.

. ContentsF 11 error, this means the lack of efficiency of the drain pump. Perhaps there is no voltage, or it burned out.

How the problem manifests itself:

  • The machine does not drain.
  • There is no spin laundry.
  • Wash stopped just starting.

Causes and Troubleshooting

If the system crashes, reset the error by shutting down and rebooting the machine.

After the above steps, does it still show the error F 11?We offer options for how to fix the problem.

Inspection of pipes and drain filter

The most common problem is clogging. In the filter can get small debris, hair, clothing parts.

  1. Disconnect the washer from the network.
  2. instagram viewer
  3. Open the door at the bottom of the hull and drain the water.
  4. Check and clean the pump, filter and drain pipe.

Did you fail to clear the F11 CMA Indesit error? Check further.

Inspection of the pump

If the drain also does not work, the cause may be a pump malfunction. The wiring may be damaged and electricity is not being supplied to the pump.

  • Remove the back cover of the washer.
  • Inspect the wires, contacts, check connections.
  • If there is no visual damage, check for an open multimeter.

Faulty impeller

When draining water in a washing machine Indesit heard the hum? Check the impeller at the time of blockage, possibly a foreign object. How to fix the situation:

  1. Remove the drain filter.
  2. Remove the snail, clean.

When it is necessary to replace the pump and its components:

  • The machine stopped working before it was provided for by the program.
  • Work is proceeding in standard mode, but water does not drain.
  • Draining occurs with extraneous sounds.

Problem with pump

A pump malfunction may cause an F11 error in the washing machine Indesit. If the previous steps did not help, do the following check:

  1. Disconnect the washer from the power supply and turn off the water.
  2. Remove the bottom panel, unscrew the pump.
  3. Multimeter check the winding resistance, should be no more than 220 Ohms. If more - the pump is better to change.
  4. Remove the hose clamps, slide off the clamps.
  5. Fit the hoses into the new part, put it back in place.

Now you know what to do when the Indesit machine produces an error F 11. After repair, turn on the control wash to check the performance of the new parts.

Error F05, F5 in the washing machine Ariston

Error F05, F5 in the washing machine AristonError Codes

Error F05 in the washing machine Ariston( Hotpoint Ariston) appears on the display after the washing is completed, while the water is in the tank. During operation, you hear a loud hum and crash. ...

Read More
Error E21 in the Bosch dishwasher

Error E21 in the Bosch dishwasherError Codes

If the dishwasher stopped during operation and displays an error code on the display, do not be intimidated. So the system informs you about a possible breakdown. When a Bosch dishwasher flashes e...

Read More
Error F08, F8 in the washing machine Ariston

Error F08, F8 in the washing machine AristonError Codes

The CM Ariston or Hotpoint Ariston display error code F08, F8.The machine gives an error when starting the system, in the middle of the cycle, before or after rinsing. What does F8 code mean? ...

Read More