After a bargain on the agenda, a logical question arises - how to properly and rationally adjust the operation of equipment. Because only the implementation of proper settings, the task of the correct parameters can provide an economical consumption of electrical energy.
In order to perform proper adjustment of the air conditioner, you need to know what modes are available equipment.
Basic settings of air conditioners
Current models of climate technology not only have air cooling, but also are heated. In order to adjust the air conditioner correctly, you need to remember 2 rules, namely:
- A slight contrast of temperatures. Comfortable room temperature is not only pleasant, but also dangerous for the human body. Leaving an artificial oasis, you fall under the rays of the scorching sun. An abrupt change in temperature in this case has a direct effect on the heart, and as a result, the duration of life.
- Saving with comfort. Such a rule is particularly relevant not only in summer, but also in cold winter, when the room is not particularly warm. To obtain maximum benefit at minimum cost, it is recommended to include an economical operating mode of the equipment.
Analyzing the question of how to properly adjust the operation of the air conditioner, it will be superfluous to note that modern models of climatic equipment have the ability to instrument, as well as individual settings for each mode.
Instrumental tuning for heat and cooling of air assumes that climate equipment works to the optimum mode, rational coordination of work of all nodes. Instrumental tuning is a crucial step, which debugging is recommended to be entrusted to a professional. Customization can be done independently. For self-tuning the air conditioner for heat or cold, set individual comfort parameters.
The basic functions of air conditioners
In former times, air conditioners supported only one function - cold. Modern models have a wider range of work, which may include heating, drying and other functions.
Variety of modes:
- Room cooling.
- Room heating.
- Air drying.
- Air ventilation.
- Automatic operation.
Cooling
It is the most requested function and the main reason for acquiring climate equipment. It is easy to adjust the cooling mode of the room using the remote control. Thus, the need to install a high chair under the equipment disappears. On the control panel, this function means “cool”.
Heating
The cold season, especially the off-season, when the heating season has not yet begun, and the room temperature is already quite low, the heat function is used. Setting the temperature, the system, reaching the specified parameters, goes into standby mode.
Drying the air( dry)
This mode is often used in the winter season or rainy weather. Using the “dry” function, the equipment works on air drying in the room. As is known, the parameters of humidity in a room have a direct impact on the rate of spread of bacteria, the number of cases and not only, the most demanded “dry” mode is in office-type premises, shopping centers, houses. On the control panel "dry" has a visual designation "drop".
Ventilation of the room
For this mode only the internal block of the system is involved, which provides air circulation in the temperature room. On the remote has the designation "fan", the image - the fan.
Automatic mode
Having familiarized yourself with all the functions, having performed the appropriate settings, you not only live in the most comfortable conditions, but also economically consume electrical energy, keeping your own wallet density.
The subtleties of the cooling function of the
Despite the fact that hot days are the shortest and most welcome time, it is much more pleasant to spend them at a comfortable temperature. For this modern air conditioners are equipped with a cooling function, which has some features.
Room cooling is possible up to 16 ° С.However, along with the available capabilities, experts recommend setting up an air conditioner with a temperature difference between the environment and the room within 5 ° C.A large temperature difference can lead to poor health, disruption of the heart.
If the temperature outside is below +12 ° C, then the air conditioner is not recommended to be used in the “cooling” mode.
Practically all models of modern computers are initially tuned to the mode of economical consumption of electrical energy. Therefore, experts recommend further reducing the parameters, as this may affect the life of the equipment.
Setting the air conditioner
In order to properly configure the operation of the air conditioner, you need to familiarize yourself with the technical documentation, make the recommended settings and start. The system can be adjusted in two ways: manually, using the remote control.
Installing the microclimate of the room on the air conditioner, the device stops working when the set parameters are reached. Thus, the thermostat is adjusted.
Subtleties of operation of the control panel( PU)
For greater convenience, modern air conditioners are equipped with an additional function, setting parameters by the control panel. It provides the ability to perform room climate control from anywhere in the room.
Today there are 2 types of control panels, the main difference of which is the principle of signal transmission:
- With the help of infrared radiation.
- By means of fixed wiring.
Configure the operation of the air conditioner using the PU ensures the timely detection of operating errors displayed on the board. It should be noted that each breakdown has its own sound and light accompaniment.
Basic commands on the air conditioning control panel
Virtually every model of remote control panels consists of a number of stationary commands that help you quickly make settings and adjustments:
- Mode - setting modes
- Swing - changing the location of the shutters according to the air flow
- Fan air curtain shutters -
- Turbo airflow power setting - selection of air conditioner operation to a maximum.
- Reset - reset is set
- Lock - locking the settings
- Led - using the light indication
- Clock - setting the time
If the air conditioner unit does not respond to data changes, you should inspect the equipment for work quality. The cause of the malfunction may be: weak batteries;mechanical damage on the body, keys, screen;infrared indicator malfunction.
When operating the PU it is impossible to:
- Dip into the water.
- Perform battery replacement.
- Reuse disposable batteries.
- Move more than 8 meters away from the control unit.
- Apply mechanical damage.
Features of using the thermostat
Using the thermostat, you can easily control and regulate the climate in the room. Often it is located on the wall, where the sun's rays, air currents, secondary heaters do not reach.
Thermostat maintenance does not require specialized procedures. It is often enough to keep the device clean and dry for normal operation.
Using the capabilities of the thermostat, the air conditioner can be configured to heat or cool the room.
Causes of Air Conditioner Damage
In order for the air conditioner to serve for many years, it is necessary to carry out regular maintenance, carefully monitor its operation. If you find the slightest deviations, experts recommend de-energizing the device and contact the appropriate company.
Air conditioner malfunction occurs for several reasons, namely:
- Failure to follow the maintenance schedule.
- Lack of refrigerant.
- constant work on maximum mode.
- Set invalid parameters.
- Breakdown of the external unit.
