Recessed hoods trying to adjust to the size of the furniture, which is not too well. It is better to think about the functionality, focusing on the beauty of the second. Assemblies have a width of 50 cm and incorporating lower resolution - is derived from the dimensions of the furniture. In models of relatively small depth, which is barely enough for two burners. Creators forget that it is more convenient and more logical to use outside near the burners (proximal to the cook). Consider a logical point of view, what kind of embedded extract buy.
The main factors of choice built-in kitchen hoods
The outer row of burners is used more often. Usually it works for most families who want to buy an embedded kitchen hood:
- When using the outer row of burners (it is assumed that the total number greater than 2) small chance that splashes of fat will reach the wall. Only at first glance it seems to be: no matter where to put the embedded cooker hood. In reality, the device covers the most commonly used burners.
extractor hood
- As a rule, most people are lazy. It is much easier to put pots and pans on the outer row.
- Soviet plates are equipped with two hot plates. And the cooking surface of the same size. Burners are located in the outer row!
The installation height is normalized kitchen hood.
The difficulty in the fact that: the depth of embedded cooker hoods small. Let the cooking zone four, but rarely have to use internal. A portal should cover the hob. If a portion of the suspension of furniture have over hob, polishing not be good. It turns out to buy an embedded hood for the kitchen is more difficult than it seems at first glance.
Stylish hood
Standard hood are often not suited to owners of expensive furniture does not like all the corrugations, is recommended for the flue gases. It has unprepossessing appearance. Meanwhile, the best chimney - read, duct - say round. Then, under the criterion of minimum power losses to be square. Popular plastic rectangular ducts - worse than others, but it is easy to hide behind the decor.
Beautiful round plastic ducts are made rarely, it is difficult to mount a high price. Standard drawing hole diameter is 150 mm. Some people believe that the false ceiling, spaced from the ceiling by a specified distance, too expensive board - kitchen turns out rather low. Because of these factors, and the owners are willing to integrate the acquisition. Corrugated duct held in a rack, to the ventilation opening will take place on sections of furniture. As a result:
- minimum power loss (recommended angle rounded to reduce flow friction).
- Ease and speed of installation duct evident.
- Corrugations cheap.
- No need to buy adapters to wrestle stykuya and sealing joints.
Extractor hood for the kitchen with light
In addition, the corrugations soft, if necessary, may slightly distort the circular shape without negative consequences. Sometimes the owners prefer to use the kitchen hood in recirculation mode. In the method at least 3-5 drawbacks, though mounting complexity are eliminated:
- gas combustion products are not removed from the dishes.
- The air above the cooking stove burning. Hoods have a relatively small height. If we talk about the built-in models have still to purchase a piece of duct pierce the ceiling section. The problem arises flow discharge. Tile from polyurethane foam does not sustain a load and allocate the weight upon melting of harmful substances.
- exhaust system is not designed to replace the ventilation, but good when forced indoor air refreshed. Please note, when working on recycling have to buy filters. Purchase will cost expensive, difficult to obtain spare parts.
Proper installation of built-in kitchen hoods for recycled utterly simple. Take the trouble to get the jigsaw to cut bay.
installation
Built-in hood is sold with furniture, or are finalizing the headset in place. For the work of master installer will take money. Turn on the said amount in the expense item for the purchase of the product.
Criteria for selection of built-in cooker hood
The first option would be the noise (sound pressure level in decibels). If the cooker hood to build, the sound effect will not decrease. Consider: cooker hoods at maximum speed give 70 dB sound pressure, like a washing machine in spin mode. Selected models even are equipped with a timer delayed shutdown after a fixed time hood turned off by itself.
There are also more subtle techniques. Separate cooker hoods work until you clear the room air. To control the cost sensors and devices are significantly more expensive than simple boxes with fans. Instead embedded kitchen hood is more profitable to take the telescope. In the initial position it takes up little space, as required portal increases, covering the outer row of burners. When uselessness may roll device.
Built-in hood
If the criterion is the price, it is worth thinking about buying a Teka hoods. It is a budget option. At least, pay attention to the performance. Immense growth extractable cubic meters should not block the bandwidth home channel.
Recommended to buy a decent power embedded hood. Not identical performance. Rather, it is about the ability of the device to push the column of air in the duct to the roof. The lower floor of the apartment, the greater must be expended effort (although natural draft is growing).
Thoroughly solve the question of what an embedded hood is better to buy, easier to Yandex Market.
